QuattroDent - Dental Office Software

18 Route 6A, Sandwich, MA 02563 USA

70 Bridle Close, Paignton, Devon, TQ4 7ST UK

How do I upgrade from V1.02 to V2.01

Make sure you have a backup of all your QuattroDent Dental Office Software data before starting.  The upgrade modifies your database and should anything unexpected happen while the upgrade is taking place, such as a power cut, or system failure, you will need some way of restoring your data to V1.02 so that you can start the upgrade process again.

Once everything is safely backed up, make sure that no copies of the QuattroDent Dental Office Software are running, anywhere in your network.  If there are any copies of the QuattroDent Dental Office Software active they will hold open files that the installer needs to update.  This will cause the update to fail, leaving you with corrupt data.  To be sure nothing is running it is recommended that you power down all the machines except for the server machine.  If you are unable to do this make absolutely certain that QuattroDent is not running, and that no-one can start one while you are doing the upgrade.

If you are sure everything is closed down go ahead and run the installer.  You can download the QuattroDent V2.01 installer from http://www.intervations.com/download/quattrodent/201/_quattrodent.exe

The installer will ask you to confirm a few details, then will begin upgrading your data.  Once the installer is finished it is recommended (but not required) that you restart the server machine. Then you should start the QuattroDent Dental Office Software on the server machine to make sure everything is working correctly.

When you are happy the QuattroDent Dental Office Software V2.01 is installed successfully on the server machine you can install the same version on all of your terminals.  Other machines do not need to be closed down for you to do this.  The data is only upgraded when installing the server copy.